Superheor Advice: Let’s GEET Down to Business!
Paul Pantone is a self-taught inventor who has completed over 450 different creations. His inventions range from a 25-caliber log splitter to ‘Instant Paint’ and even a fuel-efficient motor!
GEET (Global Environmental Energy Technology) is a processor capable of converting hydrocarbon fuel and waste products into hydrogen-rich synthetic natural gas. It is designed to increase the efficiency and decrease the pollution of the internal combustion motor. This technology further allows internal combustion motor to run on fuels such as crude oil, battery acid, and even cola! It has the ability to be retrofitted to any internal combustion engine, including any gasoline, diesel, or turbine engine
Parts can be purchased and then built from plumbing parts from any local hardware store. Benefits include multi fuel availability and up to 99% lower emissions and double the run time or MPG.
There are three subsystems of the GEET motor:
1. Liquid to Vapor Phase Changer
· Converts a liquid fuel mixture to its gaseous form.
2. Reaction Chamber
· Runs the cold fuel vapor through the center, and opposite direction of hot exhaust flow.
· The chamber acts as a vacuum for the collision of hot and cold air. This suction helps speed up the hot/cold air reaction and expansion.
· This reaction creates an entirely new ‘GEET fuel’ with minimal pollutants, and runs clean!
3. Air Management Valve.
· GEET fuel vapor is mixed with incoming fresh air, which helps to keep combustion viable.
The GEET motor is a ‘fuel refinery, plasma field generator, and fuel delivery all in one.’
Paul Pantone has dedicated his life to cleaning up the planet for our children. By making his technology public he allows ‘shop dolly enthusiasts’ to fine tune and perfect this technology for multiple adaptations including gasoline, diesel, and turbine engines.
“Try to imagine owning the ultimate home production power plant; it heats your water, generates electricity, takes care of heating and air conditioning, etc. by utilizing the waste heat from refrigeration and applying it to storage or hot water, while the generator is giving you all the electricity you want.
This is all possible using the GEET Fuel Processor. In simple definition, the GEET Fuel Processor could be called a new type of carburettor with a miniature refinery built in. With it, there is no need for catalytic converters, smog pumps and many other costly items on cars, as the GEET Fuel Processor is not just a fuel delivery system it is also a pollution elimination unit! Your mileage will be greatly increased if you are truly consuming ALL of the available energy, from whatever fuel you may be using.”
n Paul Pantone [Exotic Research Magazine V1N2 Apr/May/Jun 1996]
Madison making threads on the reactor core - her technique is a bit....unique!
As a family we have looked at alternative fuel sources such as hydrogen fuel cells. We heard Paul Pantone being interviewed and he mentioned that the basic experimental technology plans were being made available to the public to advance the ‘fine tuning’ of the technology. We leapt at the opportunity to apply our little brother’s inventor streak (he once turned a smoke detector and the cord off of a good lamp into an alarm system for his bedroom) to a worthy CO2 invention.
Rachael cutting the reactor core to length: we gave her this job because of her sparkling personality
What we didn’t realize when we started this project is that as total innocents in the world of mechanics, physics, welding, fitting we had a LOT to learn before we even built our model. (On the other hand, we had screaming in frustration down to a fine art)
Madison drilling the fittings for the reactor (we had to design these since our plumbing store didn't carry the suggested product)
Rachael at the lathe smoothing the facing
Our motor is running on a 50% fuel/water mix and we are fine tuning it to run in our cold weather (insert chattering screams of frustration). This is a project that will keep us occupied through winter and into spring. GEET fuel, the new perfume of environmentalists!
Dad teaching Rachael TIG welding - so far no one is on fire!
The environmental benefits of this fuel processor are without limit. Reducing fuel consumption from 50-80%, cleaner emissions and cheap parts!
Fine tuning the inner reactor
This might just be the technology that can wean us from our dependence on oil and gasoline and give us breathing space to design even better fuels and fuel free motors.
Gotta Getta Geet!
there are approximately 12,650,000 cars in Canada and 247,000,000 vehicles in the United States. Each driver averages 15,000 miles per year of travel.
1 mile travel = 1 pound of CO2
3,894,750,000,000 pounds of CO2 produced per year
If we applied GEET fuel technology and increase mileage by 50% (ie use half the amount of fuel) and have clean emissions, no oil, clean motors....
….that’s 1.95 x 1012 or 1,950,000,000,000 lbs CO2 reduced
And that’s just vehicles in North America!
|
